Kuuma by Camco: Hot water Systems are built from high grade aluminium and rigously tested during the manufacture process. All units now come fitted with a sacrificial anode to assist in the reduction of electrolysis. 
The units capture heat from either their electric element, or the heat exchange system to ensure you always have a supply of clean hot water.
Like all systems, proper fitting and installation and maintenance will ensure you have years of service from a Kuuma Hot Water System.

For more information download the manual from the support page

ALL DIMENSIONS AND DRAWINGS ARE ON THE SUPPORT PAGE

40610 (side mount) & 40611 (front-back mount)

Marine/RV Storage Water Heater - 24 litre (6 Gallon) with side mountings.

These marine hot water systems are designed for use in boats, and are also installed in many motor homes, RV's and transport trucks.

They heat water by:

- circulating engine cooling water through a heat exchanger

- a 240 or 120 Volt AC electric element

The two systems can be used independantly or together to heat water.

- 1500 Watt AC element (240 Volt standard, also available in 110v on request)
- 240 Volts
- Large Heat Exchanger
- TIG welded aluminium tank and casing
- Side mountings

Marine Water Heater - 24 litre (6 Gallon) storage capacity - 240 Volt Electric and high performance Heat Exchange capabilities.

* Not recommended for use with raw/salt water in the engine heat exchange circuit as this will shorten the life of your water heater.


Tested and certified to the latest Australian standard
AS/NZS 60335.2.21-2002 - ESO Approval No. Q080349
UL & CE certified including the marine supplement - ignition protected

Installed by:
Azzurra, Beneteau, Campion, Chris craft, Crownline, Doral, Donzi, Hunt, Hunter, Leopard, Nordic tug, Mustang, Princecraft, Sabre

A direct replacement for most Seaward, & Atwood Marine Water heaters the Australian versions of Kuuma/Force 10's have improved pressure and temperature relief valves and improved elements with polymer end caps.


40610
Mount Postion: Sides
Length: 495mm
Width: 394mm
Height: 346mm
Dry Weight: 15kg

40611
Mount Postion: Sides
Length: 505 mm
Width: 350 mm
Height: 346mm
Dry Weight: 15kg


41110 (side mount) & 41111 (front-back mount)

Marine/RV Storage Water Heater - 45 litre (11 Gallon) with side mountings.

These marine hot water systems are designed for use in boats, and are also installed in many motor homes, RV's and transport trucks.

They heat water by:

- circulating engine cooling water through a heat exchanger

- a 240 or 120 Volt AC electric element

The two systems can be used independantly or together to heat water.

- 1500 Watt AC element (240 Volt standard, also available in 110v on request)
- 240 Volts
- Large Heat Exchanger
- TIG welded aluminium tank and casing
- Side mountings

Marine/RV Water Heater - 45 litre (11 Gallon) storage capacity - 240 Volt Electric and high performance Heat Exchange capabilities.

* Not recommended for use with raw/salt water in the engine heat exchange circuit as this will shorten the life of your water heater.


Tested and certified to the latest Australian standard
AS/NZS 60335.2.21-2002 - ESO Approval No. Q080349
UL & CE certified including the marine supplement - ignition protected

Installed by:
Azzurra, Beneteau, Campion, Chris craft, Crownline, Doral, Donzi, Hunt, Hunter, Leopard, Nordic tug, Mustang, Princecraft, Sabre

A direct replacement for most Seaward, & Atwood Marine Water heaters the Australian versions of Kuuma/Force 10's have improved pressure and temperature relief valves and improved elements with polymer end caps.


41110
Mount Postion:  Side
Length: 545 mm
Width: 475 mm (including mounting tabs)
Height: 405 mm
Dry Weight: 18kg

41111
Mount Postion: Front/Back
Length: 572 mm
Width: 406 mm
Height: 406mm
Dry Weight: 18kg

41810 (vertical mount) & 420102 (horizontal mount)

Marine/RV Storage Water Heater - 75 litre (20 Gallon) for Vertical mounting

- All Kuuma Marine Water Heaters come standard with 240 Volt Electric elements and high performance Heat
Exchange capabilities.
* Not recommended for use with raw/salt water in the engine heat exchange circuit as this will shorten the life of your water heater.


1500 Watt 240 Volts AC element (available in 110v on request)
 
Large Heat Exchanger
TIG welded aluminium tank and casing
Bottom mountings Vertical orientation

Tested and certified to the latest Australian standards
AS/NZS 60335.2.21-2002 - ESO Approval No. Q080349
UL & CE certified including the marine supplement - ignition protected

Installed by:
Azzurra, Beneteau, Campion, Chris craft, Crownline, Doral, Donzi, Hi-Craft Motorhomes, Hunter, Leopard, Nordic tug, Mustang, Princecraft, Sabre etc. etc.

A direct replacement for most Seaward, & Atwood Marine Water heaters the Australian versions of Kuuma/Force 10's have improved pressure and temperature relief valves and improved elements with polymer end caps.


41810
Mount Postion: Bottom Front/Back & Sides
Length: 476 mm
Width: 476 mm
Height: 750 mm
Dry Weight: 22 kg 

420102
Mount Postion: Bottom Front/Back & Sides
Length:  857 mm (overall including P&T valve)
Width:   410 mm
Height:  406 mm
Dry Weight: 22 kg