Fridge/Freezer Kits
ALL DIMENSIONS AND DRAWINGS ARE ON THE SUPPORT PAGE
All kits come with thermostats, and some mounting hardware. The units should be fitted by a qualified refrigeration mechanic and must have sufficient ventilation to allow for 600cm² free air inlet and outlet. Performance of these units varies depending on ambient temperatures, insulation quality and thickness, and quality and quantity of airflow over the condensor. All litre sizes are only rough guides. Correct sizing should be completed by a qualified refrigeration engineer to ensure natural convection, and limit temperature variations across the cooled area. Fitting of a fan to move the air internally is not recommended unless it has been designed to do so by a refrigeration engineer. While these units are quite simple to fit, we recommend that a refrigeration mechanic fit and commission the units. We are not responsible for incorrect fitting, or mounting of the units. Failures as the result of incorrect fitting or mounting is not warranty, and repairs or replacements as a result will be the responsibility of the purchaser.
Incorrect sizing or incorrect installation is not the responsibility of the manufacturer or its representatives and liability for incorrect sizing or incorrect installation will not be considered warranty.
BD35 (LT201 compressor) specs | BD50 (LT211 compressor) specs | BD80 (LT221 compressor) specsLT201-F1 This is our smallest kit. Pipe length is 3.7metres Evaporator plate - 406mm x 254mm (Plate size does not include pipe fittings.) LT201 - LxWxH - 280mm x 230mm x 195mm |  |
| LT201-F2 Pipe length is 3.7metres Evaporator plate x 2- 406mm x 254mm (Plate size does not include pipe fittings.) Plates can be separated by upto 450mm. LT201 - LxWxH - 280mm x 230mm x 195mm |  |
| LT211-F3 Pipe length is 3.7metres Evaporator plate x 3 - 406mm x 254mm (Plate size does not include pipe fittings.) 2 plates are back to back(must stay this way), and the third plate can be separated by upto 450mm. LT211 - LxWxH - 280mm x 230mm x 195mm |  |
| LT211-FM Pipe length is 3.7metres Evaporator plate - 815mm x 290mm (Plate size does not include pipe fittings.) Plate can be carefully bent to shape with minimum radius of bends is 50mm. LT211 - LxWxH - 280mm x 230mm x 195mm |  |
| LT211-FL Pipe length is 3.7metres Evaporator plate - 915mm x 380mm (Plate size does not include pipe fittings.) Plate can be carefully bent to shape with minimum radius of bends is 50mm. LT211 - LxWxH - 280mm x 230mm x 195mm |  |
| LT211-RT4 This unit is designed for a fridge/freezer system, like single door fridge/freezers Evaporator plate - 267mm x 317mm x 165mm (Plate size does not include pipe fittings.) No door is fitted on the unit, only a back. LT211 - LxWxH - 280mm x 230mm x 195mm |  |
| LT211-RT6 This unit is designed for a fridge/freezer system, like single door fridge/freezers Evaporator plate - 356mm x 280mm x 172mm (Plate size does not include pipe fittings.) A door is fitted to this unit. LT211 - LxWxH - 280mm x 230mm x 195mm |  |
Condensor units & Evaporator Plates
LT201, LT211, LT221 Condensor system. The physical size of all the condensors are the same, only the compressor/module varies. Each unit comes with screw couplings. Couplings are available upon request. The units have a holding charge within them to ensure system remains moisture free. |  |
| F1 Evaporator Plate Evaporator plate - 406mm x 254mm (Plate size does not include pipe fittings.) |  |
| F2 Evaporator Plate Evaporator plate - 2 of 406mm x 254mm (Plate size does not include pipe fittings.) |   |
| F3 Evaporator Plate Evaporator plate - 3 of 406mm x 254mm (Plate size does not include pipe fittings.) 2 of the plates must remain back to back. |   |
| FM Evaporator Plate Evaporator plate - 815mm x 290mm (Plate size does not include pipe fittings.) Plate can be carefully bent to shape with minimum radius of bends is 50mm. |  |
| FL Evaporator Plate Evaporator plate - 915mm x 380mm (Plate size does not include pipe fittings.) Plate can be carefully bent to shape with minimum radius of bends is 50mm. |  |
| RT4 Evaporator Plate Evaporator plate - 267mm x 317mm x 165mm (Plate size does not include pipe fittings.) No door is fitted on the unit, only a back. |    |
| RT6 Evaporator Plate Evaporator plate - 356mm x 280mm x 172mm (Plate size does not include pipe fittings.) A door is fitted to this unit. |    |